Premiere Pro · 17 November 2026

How to animate text in Premiere Pro: titles, lower thirds and pop-up text with sound

Where text lives in Premiere now that Essential Graphics is gone, how to animate it with keyframes, how to make it pop on the word you say with a whoosh under it, where to get templates, and what AI can do for you.

By Pouya Eti9 min read Updated 17 November 2026

The short answer: since Premiere 25.0 there's no Essential Graphics panel. You add text with the Type tool and animate it in the Properties panel: turn on animation for Position, Scale, Opacity or Rotation, and set two keyframes. Templates in the Graphics Templates panel give you ready-made titles and lower thirds. To make text pop on the word you say, line its first keyframe up with that word and put a short whoosh or pop under it. Or let AI write and place the titles for you, which is what my plugin, Radbin for Premiere, does.

A note on the name: Adobe renamed Premiere Pro to Adobe Premiere with 26.0, in January 2026, but most people still search for Premiere Pro, so I use both.

Titles Claude added to my video, with their sound, from 10:36.

How do you add text in Premiere Pro now that Essential Graphics is gone?

Take the Type tool (T), click in the Program Monitor and type. Your text becomes a graphic clip on the timeline. Select it, and the Properties panel holds everything Essential Graphics used to: the font, size, fill, stroke, shadow and background. Ready-made titles live in the Graphics Templates panel.

How do you animate text with keyframes?

  1. Select the text clip and open its properties in the Properties panel.
  2. Move the playhead to where the text should finish moving, and turn on animation for the property you want: Position, Scale, Opacity or Rotation. That sets the first keyframe.
  3. Move the playhead a few frames earlier and change the value, for example Opacity to 0 or Scale to 0. Premiere fills in every frame between the two.
  4. Smooth it: in Effect Controls, right-click the keyframes and choose Ease In and Ease Out, so the move slows down instead of stopping dead.

Three animations cover most titles: a fade (Opacity), a slide (Position, with a fade), and a pop (Scale from about 0 to 110% and back to 100% over six to eight frames, which gives it a little bounce).

How do you make text pop up on the word you say?

Find the word first. In the Text panel, transcribe the sequence and click the word: the playhead jumps to it. Put the text's first keyframe there, so the title arrives with the word, never before it. A title that appears before you say it gives the line away; one that arrives late feels like a correction.

For a typewriter or word-by-word reveal there's no built-in effect: use a template, or keyframe a mask across the text, one word at a time.

How do you make a lower third in Premiere Pro?

The quick way: open the Graphics Templates panel, find a lower third among Adobe Stock's free and paid templates, drag it onto a track above your video and type the name. To build your own, draw a rectangle with the Rectangle tool, type the name over it, and in Properties use Responsive Design so the box pins to the text and grows with longer names. Then slide it in from the left with a Position keyframe and a fade. Keep a name on screen for three to five seconds.

How do you reveal text with a mask?

Add a rectangle mask to the text, then keyframe the mask's position so it uncovers the words from one side. Premiere 26.0 redesigned the shape masks, and in 27.0 effects and masks show as cards in the Properties panel, so it's quicker than it used to be. It's the cleanest way to do a wipe or a typewriter reveal by hand.

How do you add a whoosh or pop to a title?

Put a short sound effect on an audio track under the title, with its loudest moment on the frame the text lands. Keep it a few dB under your voice: the rule I built into my plugin is 3 to 4.5 dB under for whooshes and pops, and quieter still for ticks. Libraries such as Envato Elements and Motion Array include sound effects, and Premiere 27.0's Generative Media Tool can make one from a text prompt, for generative credits.

Where can you get animated title templates?

WayCostSoundOn the right wordText editable in Premiere
Keyframes by handIn your planAdd your ownYou place itYes
Adobe Stock templatesFree and paidAdd your ownYou place itYes
MixkitFree, 268 title templatesNoneYou place itYes
Envato ElementsFrom $16.50 a monthIn its libraryYou place itYes
Motion ArrayFrom $15.99 a month, yearlyIn its libraryYou place itYes
Radbin for Premiere (mine)Part of the edit, about 4 credits a minute; 40 freeEach title's ownClaude places itNo, edited in the Studio

Prices from each site on 17 November 2026. Templates give you the most control and the most clicks: you still decide where each one goes.

How long should a title stay on screen, and where should it sit?

  • Long enough to read twice: at least 3 seconds, or half a second a word, whichever is longer, and half again for a number or a call to action.
  • Short lines: one to five words a line, two lines at most.
  • Off the face, on the quietest part of the picture, and inside the frame's safe area.
  • In on the word, out faster than it came in.

Those are the rules I gave Claude in my plugin, after a lot of trial and error on my own videos.

Can AI add animated titles in Premiere for you?

Yes. In Radbin for Premiere, Claude writes the titles while it plans the edit, from what you actually said. It chooses among 13 kinds, among them a lower third, a headline, a step, a number, a call to action, a checklist, a score, a chapter, a quote and pros and cons, so a list you say aloud becomes a checklist and a new part becomes a chapter. Each title comes in on its word, sits clear of your face, and has its own sound. Watch (10:36)

  • Three levels of motion: Simple, Medium and Advanced. Claude uses Medium for most titles and Advanced for the big moments.
  • Change anything in the Studio: the words, one of eight colour sets, an arrow's direction, the motion, or all titles at once.
  • Ask Claude for another version: shorter, another kind, more motion, calmer, or in your own words, for 2 credits.

In my video, I'd said there was a link in the description, so it "brought up a title" for it. Then "it put the sound effects on it, it put the design of it, it's just ready." Watch (14:26)

The honest limits: the titles arrive as finished clips, not editable Premiere text, so you change them in the Studio and press Update. And it doesn't add callouts that point at things on your screen. Titles are part of the full edit, about 4 credits a minute: everything else Claude does inside Premiere.

Radbin for Premiere

Titles on the right word, with their sound, inside Premiere Pro

Radbin for Premiere's AI Edit writes animated titles from what you say and places each on its word, with its own whoosh or pop, in a new sequence. Your first 40 credits are free.

Try it free · 40 credits No card · 30 days · AI Edit only

Watch Radbin on YouTube

Real tests and tutorials, inside Photoshop and Premiere. See the whole channel.

Questions people ask

Does Premiere have text animation presets?
Not built in, as far as I could find in 26.x or 27.0. Animate text with keyframes in the Properties panel, or use a ready-made template from the Graphics Templates panel.
Where did the Essential Graphics panel go?
Since Premiere 25.0 you edit text and shapes in the Properties panel, and browse templates in the Graphics Templates panel.
Can I make a typewriter text effect in Premiere?
Not with a built-in effect. Use a template, or keyframe a mask across the text. Radbin's Advanced headline titles type the words in with soft key sounds.
How loud should a whoosh or pop be under a title?
A few dB under your voice, so it adds energy without covering a word. The rule in my plugin is 3 to 4.5 dB under the voice for whooshes and pops.
Can I edit Radbin's AI titles in Premiere?
They arrive as finished clips, not editable text. You change the words, colours, arrow or motion in the Studio and press Update, and their sounds sit on their own tracks, so you can lower or mute them.
Not open yet

Radbin opens Monday 28 September.

At 11:00 New York time. Leave your email and get the link 5 minutes early.

You will also get our launch emails. Unsubscribe anytime.